www.sunled.com part number: ZUY60W 3.0mmx1.5mm smd chip led lamp apr 23,2011 sdsa2532 v6 layout: maggie l. p. 1/4 features ideal for indication light on hand held products long life and robust package variety of lens types and color choices available package : 2000pcs / reel moisture sensitiv ity level : level 3 rohs compliant absolute maximum ratings (t a =25c) uy (gaasp/ gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjec t to change without notice. uy (gaasp/gap) unit forward voltage (typ.) (i f =20ma) v f 2.1 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 590 nm wavelength of dominant emission (typ.) (i f =20ma) d 588 nm spectral line full width at half-maximum (typ.) (i f =20ma) 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c) part number emitting color emitting material lens-color wavelength nm p viewing angle 2 1/2 min. typ. ZUY60W yellow gaasp/gap water clear 8 14 590 70 luminous intensity (i f =20ma) mcd
www.sunled.com part number: ZUY60W 3.0mmx1.5mm smd chip led lamp apr 23,2011 sdsa2532 v6 layout: maggie l. p. 2/4 ? uy led is recommended for reflow soldering and soldering profile is shown below.
www.sunled.com part number: ZUY60W 3.0mmx1.5mm smd chip led lamp apr 23,2011 sdsa2532 v6 layout: maggie l. p. 3/4 ? the device has a single mounting surface. the device must be mounted according to the specifications. ? reel dimension ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: ZUY60W 3.0mmx1.5mm smd chip led lamp apr 23,2011 sdsa2532 v6 layout: maggie l. p. 4/4 packing & label specifications
|
